Aster Corporation

Please Note:- Mentioned Price may be  tentative/for basic model or for starting Range, it may change according to  circumstances. It is always suggested to get the best price, Contact Aster Corporation.

Additional Information:

• Production Capacity: 100
• Delivery Time: 4 to 5 working days

FAST SERIES R410A REFRIGERANT EVACUATION/VACUUM PUMPShort Description:Features:
Vacuuming Quickly·Ideal use for R12, R22, R134a, R410a·Patented anti-dumping structure to avoid oil leakage·Overhead vacuum gauge, compact and easy to operate·Built-in solenoid valve to prevent oil backflow to system·Integral cylinder structure to guarantee reliability·No oil injection and less oil mist, prolonging oil service life·New motor technology, easy startup and carry


Product Description
Refrigerant R410 is a new type of environmentally friendly refrigerant, which does not destroy the ozone layer. So it is widely used in domestic and commercial air conditioner.
Since the R410A is different from other refrigerants used before, like R12, R22 ect, it is easily affected by impurities such as moisture, oxide layer, grease, etc. Therefore, full attention should be paid during construction and operation, and clean hose should be used to prevent the mixing of water and other substances. Deep vacuum should be done to prevent the air in the system will react with the refrigerating oil and affect the properties of the refrigerating oil. In addition, a solenoid valve should be used to prevent vacuum pump back flow into system.
The F series of vacuum pump are a better choice when good using experience is a major consideration. It equiped with built-in solenoid valve and overhead vacuum meter as standard.Since oil leakage is a matter if the pump was side down during your working or driving. So our pump's biggest feature is to avoid this risk of oil leakage. And the overhead vacuum meter design also bring you a new using experience to avoid you lean down to read the exact vacuum data.
In addition, reinforced aluminum alloy oil tank, effective heat dissipation, resistance to chemical corrosion. Oil color and level are easy to see with the oversized sight glass. The powerful and lightweight DC motor delivery a great starting moment is easy for starting and high efficiency, which can keep it working perfectly even is lower ambient temperature.
Model 2F0Voltage 230V~/50-60Hz or 115V~/60Hz Ultimate Vacuum 150 microns Input Power 1/4HPFlow Rate (Max.) 4CFM  113L/minOil Capacity 200ml Weight                   4.7kgDimension 309*113*198Inlet Port 1/4"SAE

Short Description:Features:
Vacuuming Quickly·Non-sparking design, suitable for use with A2L refrigerants(R32,R1234YF…) and other refrigerants(R410A, R22…)·Brush-less motor technology, More than25% lighter than similar products·Built-in solenoid valve to prevent backflow to system·Overhead vacuum gauge, compact design and easy to read·Integral cylinder structure to guarantee reliability

Product Description
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. it can reduce electricity consumption up to approximately 10% compared to thatof air conditioners using refrigerant R-22. Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
F series of R32 vacuum pump is special design for this new generation refrigerant, it can be uses with (A2L or A2) flammable refrigerants and backward compatible with old refrigerant (such as R12,R22 and R410A etc). Equiped with built-in solenoid valve and overhead vacuum meter as standard. In addition, reinforced aluminum alloy oil tank, effective heat dissipation, resistance to chemical corrosion. Oil color and level are easy to see with the oversized sight glass. The powerful and lightweight brush-less DC motor delivery a great starting moment is easy for starting and high efficiency with long service life, which can keep it working perfectly even is lower ambient temperatur
Model 2F0R Voltage 230V~/50-60Hz or 115V~/60HzUltimate Vacuum 15micronsInput Power 1/4HP Flow Rate (Max.) 1.5CFM 42 L/minOil Capacity 280ml Weight 4.2kg 4.2kg Dimension 309x113x198 Inlet Port 1/4"SAE

Short Description:Features:
Vacuuming Quickly·Non-sparking design, suitable for use with A2L refrigerants(R32,R1234YF…) and other refrigerants(R410A, R22…)·Brush-less motor technology, More than25% lighter than similar products·Built-in solenoid valve to prevent backflow to system·Overhead vacuum gauge, compact design and easy to read·Integral cylinder structure to guarantee reliability

Product Description
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. it can reduce electricity consumption up to approximately 10% compared to thatof air conditioners using refrigerant R-22. Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
F series of R32 vacuum pump is special design for this new generation refrigerant, it can be uses with (A2L or A2) flammable refrigerants and backward compatible with old refrigerant (such as R12,R22 and R410A etc). Equiped with built-in solenoid valve and overhead vacuum meter as standard. In addition, reinforced aluminum alloy oil tank, effective heat dissipation, resistance to chemical corrosion. Oil color and level are easy to see with the oversized sight glass. The powerful and lightweight brush-less DC motor delivery a great starting moment is easy for starting and high efficiency with long service life, which can keep it working perfectly even is lower ambient temperatur

Model 2F1RVoltage 230V~/50-60Hz or 115V~/60HzUltimate Vacuum 15micronsInput Power 1/4HP Flow Rate (Max.) 2.5CFM 71 L/minOil Capacity 280mlWeight 4.2kgDimension 309x113x198 Inlet Port 1/4"SAE

Short Description:Features:
Vacuuming Quickly·Non-sparking design, suitable for use with A2L refrigerants(R32,R1234YF…) and other refrigerants(R410A, R22…)·Brush-less motor technology, More than25% lighter than similar products·Built-in solenoid valve to prevent backflow to system·Overhead vacuum gauge, compact design and easy to read·Integral cylinder structure to guarantee reliability

Product Description
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. it can reduce electricity consumption up to approximately 10% compared to thatof air conditioners using refrigerant R-22. Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
F series of R32 vacuum pump is special design for this new generation refrigerant, it can be uses with (A2L or A2) flammable refrigerants and backward compatible with old refrigerant (such as R12,R22 and R410A etc). Equiped with built-in solenoid valve and overhead vacuum meter as standard. In addition, reinforced aluminum alloy oil tank, effective heat dissipation, resistance to chemical corrosion. Oil color and level are easy to see with the oversized sight glass. The powerful and lightweight brush-less DC motor delivery a great starting moment is easy for starting and high efficiency with long service life, which can keep it working perfectly even is lower ambient temperatur


Model 2F2R 2F3R 2F4R 2F5RVoltage 230V~/50-60Hz or 115V~/60HzUltimate Vacuum 15micronsInput Power 1/2HP Flow Rate (Max.) 5CFM  142L/minOil Capacity 450ml Weight 6.5kg Dimension 339x130x225 Inlet Port 1/4"&3/8"SAE

Short Description:Features:
Vacuuming Quickly·Non-sparking design, suitable for use with A2L refrigerants(R32,R1234YF…) and other refrigerants(R410A, R22…)·Brush-less motor technology, More than25% lighter than similar products·Built-in solenoid valve to prevent backflow to system·Overhead vacuum gauge, compact design and easy to read·Integral cylinder structure to guarantee reliability

Product Description
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. it can reduce electricity consumption up to approximately 10% compared to thatof air conditioners using refrigerant R-22. Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
F series of R32 vacuum pump is special design for this new generation refrigerant, it can be uses with (A2L or A2) flammable refrigerants and backward compatible with old refrigerant (such as R12,R22 and R410A etc). Equiped with built-in solenoid valve and overhead vacuum meter as standard. In addition, reinforced aluminum alloy oil tank, effective heat dissipation, resistance to chemical corrosion. Oil color and level are easy to see with the oversized sight glass. The powerful and lightweight brush-less DC motor delivery a great starting moment is easy for starting and high efficiency with long service life, which can keep it working perfectly even is lower ambient temperatur


Model            2F3R Voltage               230V~/50-60Hz or 115V~/60HzUltimate Vacuum           15micronsInput Power    3/4HP Flow Rate (Max.)   7CFM  198L/minOil Capacity   520ml Weight          9.8kg Dimension          410x150x250 Inlet Port           1/4"&3/8"SAE

Short Description:Features:
Clear TankView “Heart” is beating·Patent structureReduces oil leakage risk·Clear oil tankClearly view condition of oil and system·One-way valvePreventing vacuum oilbackflow to system·Solenoid valve(S1X/1.5X/2X,Optional)100% Preventing vacuum oil backflow to system
Product Description
The S Series of vacuum pumps are a great range when price is a major consideration. Available in a wide range of capacities. And flow rate cover from 2-4CFM(57-113LPM),so they are ideal for split systems, light duties in automotive and small commercial applications.
Features a full clear oil reservoir to give you an instant indicator of the condition of your oil and system. And the reservoir applied customized special engineering plastic ABS for durable usage, troubleshoot problems quickly and easy to repair or replace the parts.
  Model S1   Voltage 230V~/50-60Hz   Ultimate Vacuum 150 microns  Input Power 1/4HP   Flow Rate(Max.) 2CFM57L/min 3CFM85 L/min 4CFM113  L/min  Oil Capacity 230ml   Weight 3.3kg   Dimension 266x121x194  Inlet Port 1/4"SAE

Short Description:Features:
Vacuuming Quickly·Non-sparking design, suitable for use with A2L refrigerants(R32,R1234YF…) and other refrigerants(R410A, R22…)·Brush-less motor technology, More than25% lighter than similar products·Built-in solenoid valve to prevent backflow to system·Overhead vacuum gauge, compact design and easy to read·Integral cylinder structure to guarantee reliability

Product Description
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. it can reduce electricity consumption up to approximately 10% compared to thatof air conditioners using refrigerant R-22. Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
F series of R32 vacuum pump is special design for this new generation refrigerant, it can be uses with (A2L or A2) flammable refrigerants and backward compatible with old refrigerant (such as R12,R22 and R410A etc). Equiped with built-in solenoid valve and overhead vacuum meter as standard. In addition, reinforced aluminum alloy oil tank, effective heat dissipation, resistance to chemical corrosion. Oil color and level are easy to see with the oversized sight glass. The powerful and lightweight brush-less DC motor delivery a great starting moment is easy for starting and high efficiency with long service life, which can keep it working perfectly even is lower ambient temperatur


Model 2F2R 2F3R 2F4R 2F5RVoltage 230V~/50-60Hz or 115V~/60HzUltimate Vacuum 15micronsInput Power 1/2HP Flow Rate (Max.) 5CFM  142L/minOil Capacity 450ml Weight 6.5kg Dimension 339x130x225 Inlet Port 1/4"&3/8"SAE



Model           2F4RVoltage                 230V~/50-60Hz or 115V~/60HzUltimate Vacuum         15micronsInput Power 1HP Flow Rate (Max.) 9CFM 255L/min Oil Capacity 500ml Weight           10kg Dimension 410x150x250 Inlet Port 1/4"&3/8"SAE

Short Description:Features:
Vacuuming Quickly·Non-sparking design, suitable for use with A2L refrigerants(R32,R1234YF…) and other refrigerants(R410A, R22…)·Brush-less motor technology, More than25% lighter than similar products·Built-in solenoid valve to prevent backflow to system·Overhead vacuum gauge, compact design and easy to read·Integral cylinder structure to guarantee reliability

Product Description
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. it can reduce electricity consumption up to approximately 10% compared to thatof air conditioners using refrigerant R-22. Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
F series of R32 vacuum pump is special design for this new generation refrigerant, it can be uses with (A2L or A2) flammable refrigerants and backward compatible with old refrigerant (such as R12,R22 and R410A etc). Equiped with built-in solenoid valve and overhead vacuum meter as standard. In addition, reinforced aluminum alloy oil tank, effective heat dissipation, resistance to chemical corrosion. Oil color and level are easy to see with the oversized sight glass. The powerful and lightweight brush-less DC motor delivery a great starting moment is easy for starting and high efficiency with long service life, which can keep it working perfectly even is lower ambient temperatur


Model           2F5RVoltage                 230V~/50-60Hz or 115V~/60HzUltimate Vacuum         15micronsInput Power 1HP Flow Rate (Max.) 11CFM 312L/min Oil Capacity 480ml Weight           10.2kg Dimension 410x150x250 Inlet Port 1/4"&3/8"SAE